ok poll please should the nut slots be cut so string sits exactly at

We're talking perhaps a couple of thousandths of an inch gap The point of this method, is that the nut slots can be adjusted irrespective of

ok poll please should the nut slots be cut so string sits exactly at height adjusted correctly) to cut it down It's very possible for a very well cut nut slot to not be measurable with a feeler gauge

We're talking perhaps a couple of thousandths of an inch gap The point of this method, is that the nut slots can be adjusted irrespective of

slot lady nude Ideally, most guitars have a nut action that yields around 015 and 020 between the bottom of each string and the crown of the 1st fret

Straight from the factory or off the shelf, an instrument rarely has its nut slots cut to ideal depths Generally they are always cut a little high so that

nut slot files Depending on the thickness of the pencil line, 5mm, you can file a slot to the top of the line Then check for height of string above the

Hosco Groobar Groobar is a 4 piece set of hardened steel gauges to prevent cutting nut slots to deep